|
X-BOLTS!!!
Do you use your tractor (John Deere 40 thru 8000 series) for a
high drawbar impact job? This would be pulling Large Stack
Wagons, Heavy Balers, and Dirt moving equipment!!!?
If so, don't risk downtime this coming summer with a huge
differential repair. We are the only dealer that we know of that offers
this program. We will replace your differential bolts, washers,
gaskets, and supply the labor for the following prices. (In our
Shop or Locally). We will bid to travel anywhere or we
will be glad to tell your local technicians how to perform the
operation if you are too far away.
40 Series--------$325.00
50&60 Series-----$190.00
**can be done in field for $220.00(locally)
8000 series------$210.00
**can be done in field for $245.00 (locally)
(There is no free
hauling on the X-Bolt program)
PREVENT COSTLY BREAK DOWNS
ON YOUR 9000 SERIES COMBINES
TAKE ADVANTAGE OF OUR WINTER PARTS AND SERVICE DISCOUNTS
ON THESE REPAIRS.
| WATER PUMP |
EVERY |
1500 HOURS |
| FEEDER HOUSE |
EVERY |
1000 HOURS |
| STRAW WALKERS |
EVERY |
900 HOURS |
| UNLOADING AUGER |
EVERY |
900 HOURS |
| SHAKER SHOE BEARINGS |
EVERY |
600 HOURS |
Be sure to ask us about our "UNDERHAULS". A must for
the mid-hour machines that are not using oil.
From $1200.00 to $1,570.00
Also check with us on "OVERHEADS" AND
"OVERHAULS".
Overheads $390.00 to $495.00
Overhauls $3,125.00 to $4,750.00
BACK BY POPULAR DEMAND!!!! Our "TRACTOR CATCH ALL
PROGRAM". Call and see what we will do for your tractor for
$795.00. It is something that every tractor should have
done......probably every year.
All parts will be in addition to this price. Any work done above the jobs listed below will be
added to the bill. Any extra work will be done with your OK only. This program includes an
inspection to determine if there are other areas in need of repair.
| Service Air Filters |
Load check and clean cables on battery |
| Check Exhaust System for Leaks |
Check A/C Freon |
| Check Head Gasket for Leaks |
Test Pressures on Clutch |
| Check Complete Machine for Leaks |
Check All Oil Levels |
| Check and Adjust Idle Speed |
Check Final Drive Bearings |
| Adjust Valves |
Check Front Axle Pivots, Bushing and Spindles |
| Inspect Turbo |
Pack Front Wheel Bearings on 2 wheel drives |
| Check and Recondition Injectors |
Completely Grease Tractor |
| Run Compression Check |
Check Hydraulic Pump Couplers |
| Replace In-Line or Sediment Filters |
Test Selective Control Valves (Hyd. Boxes) |
| Replace Fuel Filters |
Complete Check of Cooling System |
| Run on Dyno for Power and Leak Check |
Clean Radiator in Frame (do not remove) |
| Check Alternator or Generator and Starter |
|
Free Hauling
(50 Mile Maximum)
Book early and
receive free hauling. Schedule your winter work before
November 30th and get free hauling. Schedule
before December 31st and get a 75% discount on hauling.
January 31st? 1/2 off. By February 28th receive a 25%
discount on hauling. Sorry,
no free hauling for X-bolt program unless combined with another
program. All
bills receive a 6% cash discount or for qualifying customers we
have Farm Plan, no payment/no interest program.
Also this year we will offer
John Deere Retail Notes: No interest, no down payment
until 7/1/06.
Remember. All
of the programs include a complete inspection and basically at
not charge.

For more information e-mail us at:
service@ucom.net
Look for all of our machinery in the following link:
www.ourmachines.com
[Home]
|